Domestic Cylinders

Joule Domestic Cylinders

Domestic Cylinders

Built on quality and performance, with one of the widest ranges of models available you can be sure there is a model to suit.

The Cyclone brand is noted for its attractive grey finish. Noticeably there is no cheap plastic used on the outer casing. Inside only the best materials are used, duplex stainless steel body, 316L grade stainless fittings and coils. For heat pump ready cylinders our coil quality sets us apart. Unlike most cheaper brands on the market Cyclone High Gain range of cylinders use high recovery smooth tube coils for optimal performance. No other coil type on the market today offers the same transfer rate as smooth stainless tube.

Product Range

Indirect

Indirect

Within Joule hot water cylinders a few key features are a single high recovery coil, bevelled stat pocket for better fitting, pre plugged secondary tapping for ease of installation all concealed within a metallic grey, premium appearance.

Direct

Direct

Joule Direct hot water cylinders use heat sources that are physically located within the cylinder itself similar to an immersion heater, to heat the water. These direct cylinders are particularly located in either flats or apartments where there is no access to gas.

Direct hot water cylinders are supplied with 3kw Incoloy immersions fitted as standard with the option of an Titanium and 6kw immersion. All cylinders are manufactured with the same quality and performance built with branded quality components.

Twin Solar

Twin Solar

Joule Cyclone range of hot water cylinders have been designed to work with any solar system. The twin solar cylinders are manufactured with 9mm sensor pockets for the solar controller to ensure that the solar systems performs at its optimum level.

High Gain Indirect

High Gain Indirect

For Heat Pump ready cylinders our coil quality sets us apart. Unlike most cheaper brands on the market Cyclone High Gain range of hot water cylinders use high recovery smooth tube coils for optimal performance. No other coil type on the market today offers the same transfer rate as smooth as stainless tube. The high gain hot water cylinders have a single high recovery coil in coil which has been constructed to be smooth for durability and performance.

High Gain Solar

High Gain Solar

The Joule Cyclone High Gain Solar range of cylinders uses high recovery smooth tube coils for optimal performance. No other coil type on the market today offers the same transfer rate as smooth stainless tube.

Cyclone Air Direct

Cyclone Air Direct

The Cyclone Air Unvented range of cylinders are manufactured with quality and precision to the fore. The internal expansion provides a neat installation. The pre-plumbed cold feed assembly ensure consistency and quality every time. The Cyclone Air brand signifies the next generation of hot water cylinder development.

 

Pre-Plumb Indirect

Pre-Plumb Indirect

Joule Smart Plumb hot water cylinders are next generation in pre-plumbed hot water solutions. With its sleek design and pre plumbed architecture the space requirements for the pre-plumbed hot water cylinder have been reduced dramatically.

The Smart Plumb Indirect offers a shorter installation time required to fit the hot water cylinder in comparison to a standard cylinder.

Direct Solar

Direct Solar

Direct hot water cylinders by Joule are available in capacities from 100 to 3,000 litres with different immersion sizes, material construction and power outputs. Each direct hot water cylinder is manufactures from superior grade stainless steel, finished with an elegant metallic steel outer casing to finish off its premium appearance and durability. Each cylinder can be manufactured to customer specifications.

Slimline Indirect

Slimline Indirect

Joule Cyclone Slimline Indirect cylinders have been designed for the use in tight areas where there is more height than width available.

Slimline Direct

Slimline Direct

Joule Slimline Direct hot water cylinders use heat sources that are physically located within the cylinder itself similar to an immersion heater, to heat the water.  Joule Cyclone Slimline Direct Cylinders have been designed to use in tight areas where there is more height than width available.

Direct hot water cylinders are supplied with 3kw Incoloy immersions fitted as standard with the option of an Titanium and 6kw immersion. All cylinders are manufactured with the same quality and performance built with branded quality components.

Cyclone Air Indirect

Cyclone Air Indirect

The Cyclone Air Unvented range of cylinders are manufactured with quality and precision to the fore. The internal expansion provides a neat installation. The pre-plumbed cold feed assembly ensure consistency and quality every time. The Cyclone Air brand signifies the next generation of hot water cylinder development.

Thermal Store 2.0

Thermal Store 2.0

The Joule Cyclone Thermal Store 2.0 is the ideal solution for multi energy applications. Domestic hot water is produced through the fresh water module mounted on the front of the cylinder. This provides far superior flow rates compared to the internal coil version. The cylinder has a number of direct connections to allow for multiple heat source and zoning integration. The cylinder is manufactured from stainless steel and has the usual high quality specification you would see across the Cyclone range.

Horizontal Indirect

Horizontal Indirect

Our Horizontal range of cylinders come with cradles that are not only included but pre-fitted. These can be easily removed if the hot water cylinder needs to squeeze through a tight access hatch.

Online Tools

User
Dashboard

Easily manage your quotes and bypass filling out long forms when registering your Joule product warranties. Joules User Dashboard allows you to have all your details kept in a single place.

Knowledge
Centre

All your product information kept filed in one place. Browse our Knowledge Centre to view and download technical data, install manuals and brochures.

Need Help? Chat with us